Perkins Engines logo-invert
This site uses and sets "cookies" on your computer to help make this website better. You can learn more about these cookies and general information about how to change your cookie settings by visiting our Privacy and Cookies page. By continuing to use this site without changing your settings, you are agreeing to our use of cookies. Click close to remove this notification. Privacy and cookie policy

700 Series

9 results Refine Results
26560145 - Pre-fuel filter

Pre-fuel filter | 26560145

Perkins primary cartridge fuel filter/water separators protect the fuel system from particulates and water found in fuel, especially in off-road applications. Metal construction resists burst and pulse pressure. Easy to assemble installation. Integral water drain.
N/A
$20.79 $20.79
2656615 - Fuel filter assembly

Fuel filter assembly | 2656615

Complete secondary fuel filter head, filter, and water drain, to replace unit where is damaged. Includes drain cock. Complete with fuel filter 26561117.
N/A
$34.69 $34.69
2614B650 - V belt - 50.2in

V belt - 50.2in | 2614B650

Perkins V-belts, also known as Vee belts or wedge belts, are designed to prevent slippage and alignment problems. With greater load, the belt will tend to wedge into the groove, providing better performance. Widely used due to the reliability and strength from fiber reinforcement When replacing fan belts check the belt tension is correct, together with the battery and all the electrical connectors. Where engines have twin belts, check to ensure the belts are of a matched length.
N/A
$21.08 $21.08
2656086 - Pre-fuel filter assembly

Pre-fuel filter assembly | 2656086

Complete primary water separator with head, bowl and water drain, to replace unit where bowl and unit are damaged. Includes drain cock and bowl.
N/A
$60.28 $60.28
2654412 - Oil filter

Oil filter | 2654412

Spin on oil filter for Perkins engines, designed to meet the needs of Perkins engines by providing superior protection against particles that can make their way into the lubrication system during service or from component wear. Increasing emissions levels has resulted in more precise engineering tolerances in galleries and channels leaving less room between engine components than before, so choosing a genuine Perkins filter is more important than ever to ensure effective lubrication and cooling. Designed to reduce resistance to oil flow while maximizing filter efficiency and provide protection to the recommended oil service interval in the Operation and Maintenance Manual. Typically fitted with anti-drain back valve and by-pass valve to ensure the engine oil is in the right place during starting and operation. Supplied complete with sealing ring.
N/A
$10.01 $10.01
2656F802 - Fuel filter assembly

Fuel filter assembly | 2656F802

Complete secondary filters with head and water drain, to replace unit where a unit is damaged. Complete with fuel filter 26561118.
N/A
$124.18 $124.18
2614D610 - V belt - 43.3in

V belt - 43.3in | 2614D610

Perkins V-belts, also known as Vee belts or wedge belts, are designed to prevent slippage and alignment problems. With greater load, the belt will tend to wedge into the groove, providing better performance. Widely used due to the reliability and strength from fiber reinforcement When replacing fan belts check the belt tension is correct, together with the battery and all the electrical connectors. Where engines have twin belts, check to ensure the belts are of a matched length.
N/A
$39.42 $39.42
26560609 - Water drain plug

Water drain plug | 26560609

Replacement drain tap for the fuel filter. Drain taps can easily be damaged as they are frequently used to drain the water from the water separator. Perkins recommends water draining daily as part of the pre-use checks before the engine is started. For use with pre-filter 130306360.
N/A
$8.93 $8.93
2614D615 - V belt - 43.9in

V belt - 43.9in | 2614D615

Perkins V-belts, also known as Vee belts or wedge belts, are designed to prevent slippage and alignment problems. With greater load, the belt will tend to wedge into the groove, providing better performance. Widely used due to the reliability and strength from fiber reinforcement When replacing fan belts check the belt tension is correct, together with the battery and all the electrical connectors. Where engines have twin belts, check to ensure the belts are of a matched length.
N/A
$39.25 $39.25
Close